Ocean Optics TR-2 Thermoelectric Temperature Regulator - Manual (Page 4)

TR-2 Thermoelectric Temperature Regulator
TR-2 Thermoelectric Temperature Regulator 4
J3 Definition
PIN Signal Name Connections Description
1 N/C No Connect
2 VTEMP From one TR2 (Master)
Analog signal of the current temperature. Scaling is
100mv/
o
C
3 Reset All Reset signal for TR2
4 VSET From one TR2 (Master)
Set-point temperature signal to be displayed when
pushbutton is depressed. Scaling is 100mv/
o
C)
5 Ground All +5V Ground
6 Vdisplay From one TR2 (Master) Analog Signal that is displayed. Scaling is 100mv/
o
C
7 Toggle Down All Clock signal to toggle the set-point down one increment
8 N/C No Connect
9 Ground All +5V Ground
10 Toggle Up All Clock signal to toggle the set-point up one increment
S2000-H1 Header Pins (Analog) S2000-H2 Header Pins (Digital)
1 Analog Channel 0 D N/C
2 Analog Channel 1 C A/D Trigger
3 Analog Channel 2 B Software Trigger In (D3)
4 Analog Channel 3 A Trigger Mode Select (S1)
5 Analog Channel 4 1 GND
6 GND 2 +5 VDC
7 Reserved 3 F Clock
8 Analog Channel 7 4 Readout Gate
9 Analog Channel 6 5 Reserved
10 Analog Channel 5 6 Temperature (optional)
7 Read Enable
8
Trigger Mode Select/Strobe Enable
(S0)
9 Single Strobe Out
10 Continuous Strobe Out
11 Integration Clock
12 Master Clock