Ocean Optics D-2000 - Manual (Page 10)

1: Setup
2 000-10000-020-02-1209
Unpacking the D-2000
► Procedure
1. Unpack your lamp assembly carefully. Although the lamp is rigidly mounted, dropping this
instrument can cause permanent damage.
2. Inspect the outside of the instrument and make sure that there is no damage. Do not use the
instrument if damage is present.
3. Use this instrument in a clean laboratory environment (see Operating Environment ).
Contents
Your D-2000 package should contain the following:

D-2000 unit

Power cord

UV safety goggles
Connecting the Fiber Optic Cable
► Procedure
To connect the fiber optic cable to the D-2000,
1. Locate the cap on the front of the D-2000.
2. Lift the cap on the front of the D-2000 to expose the SMA connector.
3. Connect the fiber optic cable to the SMA connector.