Ocean Optics Jaz Ethernet Ferrite - Manual (Page 2)

OmniDriver Installation Instructions
2 100-4000-028-01-0209
4. Loop the Ethernet cable through the ferrite twice.
5. Snap the ferrite closed to lock it in place.
6. Plug the Ethernet cable into the Ethernet connector on the JAZ-E module, and then to a
Power Over Ethernet (POE) bridge or switch to the network (e.g., an 8-port network hub).
For More Information
You can access complete documentation for Ocean Optics products on the Software and Technical
Resources CD or by visiting our website at
http://www.oceanoptics.com . Select Technical | Operating
Instructions. Choose the appropriate document from the drop-down lists or use the Search by Model
Number field.