PolyPlanar MRD-60 - Manual (Page 6)

6
Mounting Instructions:
IMPORTANT! Before mounting be sure there is sufficient room to accommodate the unit and that
there is sufficient ventilation. Disconnect power before installation.
Receiver should be mounted within 30º (+ or— 15º)from Horizontal
Use the template provided to make the cutout. For blind installations (no rear access) the center
screw will hold the mounting blocks/brackets in place while the radio is mounted. Be sure to make
all connections before inserting Radio.
With the faceplate down insert the remaining 4 screws. Use the 5mm nut and bracket provided to
stabilize the rear of the radio.
Optional Mounting
Techniques
RM –10 Underdash or Overhead Mount
WC-70 Bracket mount Radio Cover
For more information Please refer to the
instructions supplied with these products
or on our website:
www.polyplanar.com
Plastic Blocks or
Stainless Steel Brackets
6