PolyPlanar MRD85i - Manual (Page 6)

6
Wire Color
Function
Yellow 1 B+ (+12VDC)
Green w/stripe 2 Rear Left Speaker-
Green 3 Rear Left Speaker+
Red 4 ACC (+12VDC)
White w/stripe 5 Front Left Speaker-
White 6 Front Left Speaker+
Blue 7 Relay Trigger
Gray w/stripe 8 Front Right Speaker-
Gray 9 Front Right Speaker+
Black 10 Ground (Neg)
Violet w/stripe 11 Rear Right Speaker-
Violet 12 Rear Right Speaker+
Power Wire Specifications:
Yellow Wire - Connect this wire to a constant +12V source.
Red Wire - Connect this wire to a switched +12V source such as an ignition
or accessory switch.
Black Wire - Connect this wire to the negative battery terminal or other
good power ground.
Blue Wire - This wire outputs a 12V signal when the MRD80 turns on. It is
used to remotely turn on external amplifiers.
Notes:
Use the included plug/wire bundle to connect to the power source
and speakers.