PolyPlanar MRD85i User Manual

Page 16

A U X O P E R A T I O N

B L U E T O O T H O P E R A T I O N

REPEAT PLAYING
Press 3 button

and select ―Repeat: ONE‖ to repeat same song or press 3

button again to

select ―Repeat: All‖ to repeat same album. Press 3

button again and

select ―Repeat: OFF‖ to stop repeat function.

PLAYING ALL SONGS/ALBUM IN RANDOM ORDER
Press 2 button to play all songs/album in random order.
―Random: Track‖ – to play all tracks in random
―Random: Album‖ – to play all album in random
―Random: OFF – to cancel the random function.

SWITCHING TO BLUETOOTH MODE
If a device is already paired:
Press MODE button to change to Bluetooth (BT) mode.

If there is no device paired

the display will show ―No BT Connect‖ please

follow instructions below on how to pair your device

1) Make sure you are close enough to MRD85i
2) Open Bluetooth setting on your device
3)

Choose ―Poly-Planar‖ from the list of available Bluetooth link

4) Enter ―0000‖ as the Bluetooth password (if required)
5) Once connected, you can now start playing your favorite music from your
music device.
6)

Operating Range is up to 30’ (will vary, dependent on installation)

To disconnect, please press ―AS/PS‖ button for 3 seconds.

8) To clear the pai

ring, press ―BAND‖ button for 3 seconds

IMPORTANT NOTE:
Some Bluetooth-enabled devices may take more than 45 seconds to initiate
after pairing or does not pair at all. If this happen, try to turn off the stereo
and the device and pair it again.

SELECTING SONGS
Press

button or rotate Function/Select knob to select a song.