PolyPlanar MRD85i - Manual (Page 15)

15
i P o d ® O P E R A T I O N
DISPLAY INFORMATION
Press MENU button to access current display setting. If you want to
change the display setting use the FUNCTION/SELECT knob to change
the display setting to Artist, Song, Composer, Number, Name or Category
information.
SWITCHING TO iPod® MODE
If a device is already connected:
Press MODE button to change to iPod® mode.
If there is no device connected
the display will show ―NO iPod®‖ please
follow instructions below on how to connect your devices
Turn on your DMD device then open the front panel to connect the
accessory cable to the connector on the right side of the device drawer then
insert your music device in the drawer. Use one of the 2 adapters
available to connect your device then push the drawer back in place. If
operating an iPod® device please choose the flat 30 pin connector then
press MODE button to change to iPod® mode. If you chose the 3.5mm
plug adapter press MODE button to change to AUX Input 2 mode then refer
AUX Operation on page 16 for further instructions. For iPod® mode, refer
operation instructions below:
SELECTING SONGS
Press
or button or rotate Function/Select knob to select a song.
Press and Hold or button to fast forward or rewind a song.
SELECT A SONG BY CATEGORY
Press
MENU button to enter current category then rotate
FUNCTION/SELECT knob to select a new category:
PLAYLIST/ARTIST/ALBUM/GENRE/SONG. Press FUNCTION/SELECT
knob to enter the selected category. Press FUNCTION/SELECT knob
again to navigate to all the songs or album then when done selecting a
song or album press FUNCTION/SELECT knob once or twice to confirm
and play. Press MENU button to return to the previous menu screen
PAUSING/PLAYING
Press 4 button to pause the playing. Press 4 button again to resume
playing.