6 specifications – Crown Audio XLS Series (2 rack space height with one Speakon connector) User Manual
Page 18
XLS Series Power Amplifiers
page 18
Operation Manual
Performance
XLS 202
XLS 402
XLS 602
Damping Factor (8 ohm): 10 Hz to 400 Hz
> 200
> 200
> 200
Crosstalk (below rated power,
at 1 kHz
at 20 kHz
–82 dB
–58 dB
–82 dB
–58 dB
–82 dB
–58 dB
DC Output Offset (Shorted input)
± 10 mV
± 10 mV
± 10 mV
Input Impedance (nominally balanced, nominally unbalanced)
20 kilohms, 10 kilohms
20 kilohms, 10 kilohms
20 kilohms, 10 kilohms
Load Impedance (Note: Safe with all types of loads)
Stereo
Bridge Mono
2-8 ohms
8 ohms
2-8 ohms
8 ohms
2-8 ohms
8 ohms
Voltage Gain (at maximum level setting)
31 dB
31 dB
31 dB
AC Line Voltage and Frequency Configurations Available (± 10%)
120 VAC/60 Hz and 230 VAC/50 Hz
120 VAC/60 Hz and 230 VAC/50 Hz
120 VAC/60 Hz and 230 VAC/50 Hzz
Construction
XLS 202
XLS 402
XLS 602
Ventilation
Flow-through ventilation from front to back
Flow-through ventilation from front to back
Flow-through ventilation from front to back
Cooling
Internal heat sinks with forced-air cooling
Internal heat sinks with forced-air cooling
Internal heat sinks with forced-air cooling
Air Volume Requirements (per minute per unit)
80.15 ft
3
(2.27 m
3
)
80.15 ft
3
(2.27 m
3
)
80.15 ft
3
(2.27 m
3
)
Dimensions: Width, Height, Depth (behind mounting surface)
EIA Standard19"W (EIA RS-310-B)
x 3.5” (8.9 cm) H x14" (35.6cm) D
EIA Standard19"W (EIA RS-310-B)
x 3.5” (8.9 cm) H x14" (35.6cm) D
EIA Standard19"W (EIA RS-310-B)
x 3.5” (8.9 cm) H x14" (35.6cm) D
Net Weight, Shipping Weight
21.0 lb (9.5 kg), 26.0 lb (11.8 kg)
25.3 lb (11.5 kg), 30.3 lb (13.8 kg)
27.2 lb (12.3 kg), 32.2 lb (14.6 kg)
6 Specifications