Quick install procedure – Crown Audio IQ-INT3 User Manual

Page 5

Text mode
Original mode

Page 5

IQ-INT 3 IQ Interface

IQ-INT 3 Reference Manual

Quick Install Procedure

This procedure is provided for those who are already familiar with the IQ
System and would like to install the IQ-INT 3 in the shortest time possible.
Less experienced installers or those wishing a full explanation of the
installation procedure are encouraged to refer to Section 3.

Mounting:

1 Mount the unit into a standard 19-inch (48.3-cm) equipment rack or

cabinet, or it can be stacked.

Install the wiring:

2 Connect the IQ Bus loops to the IQ-INT 3 (see Section 3.1).

3 Connect the IQ-INT 3 either to a host computer via RS232 (see Sec-

tion 3.2) or to a modem via RS232 (see Section 3.2.1).

4 Connect the unit to the AC receptacle.

Configure the IQ-INT 3:

5 Set the communication baud rate (see Section 3.2.2).