beautypg.com

Factory Direct Hardware Hansgrohe 10458 Axor Starck User Manual

Page 2

background image

2

Axor Starck Free-Standing Tub Filler

10458XX1

Technical Specification

Maximum water pressure

145 psi

Recommended water pressure

14.5 - 72 psi

Maximum hot water temp.

176

o

*

Recommended hot water temp

120

o

- 140

o

*

Max. flow rate @ 45 psi

5.8 gpm

Rough-in 10452181 must be installed and the floor finished and made watertight before the tub

filler can be installed.

This tub filler is not anti-scald. If anti-scald capability is desired, or is required by local plumbing

codes, install remote pressure balancing valve 13418181 to the hot and cold supplies before they

go into the 10452181 rough-in.

The handshower is protected against back siphonage with a check valve, located in the hand-

shower outlet on the tub filler. The check valve should be inspected and cleaned yearly.

Tub filler 10458XX1 is listed by Underwriters Laboratories.

*Please know and follow all applicable local plumbing codes when setting the temperature on the water heater