Factory Direct Hardware Hansgrohe 10071001 - Manual (Page 2)

Technical Data
Recommended hole size 1 3/8“
Maximum depth of mounting surface 1 3/8“
Flow rate @ 45 psi 2.2 gpm
Maximum water pressure 145 psi
Recommended water pressure: 14.5 - 75 psi
Recommended hot water temp.: 120 o F - 140 o F*
The supply hoses require supply stops with 3/8“ compression fittings (not included).
*Know and follow all applicable local plumbing codes when setting the temperature on the water heater.
Prepare to install the faucet:
Prior to installation, install supply stops with 3/8” outlets. The supply hoses will attach to the sup-
ply stops with 3/8” compression fittings. Neither the supply stops nor the compression fittings are
provided by Hansgrohe.
Flush the supply lines thoroughly. Damage to the faucet caused by debris in the water line is not
covered under the limited lifetime warranty.
Starck X Single Control Lavatory Mixer
10070001, 10071001, 10080001, 10084XX1
Starck X Bidet Mixer
10205001
10071001
10080001
10084001
10205001
10070001