Factory Direct Hardware Hansgrohe 06120 Swing C - Manual (Page 6)

6
Install the Handles
Retroaktiv only: Install the deco-rings on the handles.
Install the spout:
Retroaktiv Swing only: Install the deco-ring on the spout. Make sure that the set screw
hole in the deco ring lines up with the set screw hole on the spout.
All models: Remove the plaster shields from the hot and
cold valves and spout tee.
Position the handle over
the sten with the lever in
the desired “off” position.
While holding the lever
with one hand, use the
other hand to turn the bell,
and screw it down over
the valve.
All models: Remove brass plug from the spout tee.