Dexter Laundry T-1450 EXPRESS (30-Cycle) User Manual

Page 17

Notes:

 The cycle cannot be advanced during the “open drain” step of the bathes.

 The cycle cannot be advanced when the hot and cold water valves to the tub

are on after advancing during or after a chemical injection.

 The cycle cannot be advanced again while the hot and cold water valves to the

tub are on after advancing when the water temperature was 65 to 90.

 The Rapid Advance mode may only be entered after a cycle is started.

 The indicator lights will show to which segment the cycle has been advanced.

 The Rapid Advance mode cannot skip the final three tumbles of the cycle. The

door lock may remain activated for a couple minutes after the cycle has been

completed.

 The chemical injection signals will not turn on if the Rapid Advance mode is

entered before the injection.

To end the cycle without waiting for the time to count down, push and hold the

“STOP” button for 5 seconds or more. The display will then show the cycle

number and be ready to start the cycle.