dbx DriveRack PX Quickstart Guide - Manual (Page 7)

7
14.
With the RTA mic connected, place the RTA
mic on a mic stand and aim it between the
left and right main speakers approximately
25’ away.
15.
Turn the Data Wheel until pink noise is playing through your speakers at performance level (the same
volume you intend to use during your performance). The words “SET TO PERFORMANCE LEVEL” will ap-
pear in the display when you have passed the minimum threshold. Set level higher as needed.
SETUP
AFS
RECALL
SUBHARMONIC COMP/LIMITER
UTILITY
PRESET
NEXT PG
STORE
EQ
WIZARD
Inputs Sub Outs
UTILITY
PREV PG
WIZARD
0
6
12
24
36
SIG
Headroom dB Headroom dB Headroom dB
Outputs
Limiter
DriveRack PX ®
Powered Speaker
Optimizer
0
6
12
24
36
SIG
0
6
12
24
36
SIG
A. Turn the Data Wheel to adjust pink noise level.
B. Press the NEXT PG button
when your performance
level is reached.
0 dB to 6 dB typical.
Auto Level
When performance level is reached, press the NEXT PG button. The DriveRack PX will now adjust the
balance between left/right levels for your main speakers (and your subs, if you have them). Note that
you may be prompted to readjust your speaker knob settings if needed.
16.
When the display reads “Auto Level Complete,” release the RTA INPUT button.
SETUP
AFS
RECALL
SUBHARMONIC COMP/LIMITER
UTILITY
PRESET
NEXT PG
STORE
EQ
WIZARD
Inputs Sub Outs
UTILITY
PREV PG
WIZARD
0
6
12
24
36
SIG
Headroom dB Headroom dB Headroom dB
Outputs
Limiter
DriveRack PX ®
Powered Speaker
Optimizer
0
6
12
24
36
SIG
0
6
12
24
36
SIG
Press the RTA INPUT button to release.
Auto Level Complete
Release RTA INPUT
button to exit.