Prokit's Industries PT-1441 User Manual
Page 9
PT-1441 User’s Manual
www.prokits.com.tw
8
7. Screw Insertion
Set the direction of rotation of the drill to the clockwise direction. Insert the screw-bit into the slot in
the head of the screw. Hold the screw bit perpendicular to the head of the screw, otherwise the
screw or the screw head may be damaged. Press the screw bit against the screw with a constant
pressure while driving in the screw.
When the screw is completely screwed in, hold the machine firmly and release the forward &
reverse switch, otherwise the screw or the screw head may be damaged. If the forward & reverse
switch is not released immediately a high torque could also damage the drill bit or the drill.
8. Screw Removal
Set the direction of rotation of the drill to the anticlockwise direction. Insert the screw-bit into the
slot in the head of the screw. Hold the screw-bit perpendicular to the head of the screw, otherwise
the screw or the screw head may be damaged. Press the screw bit against the screw with a
constant pressure while removing the screw.
Maintenance and Clean
Attention! Always remove the battery before carrying out any work on the machine.
To clean, always use a dry or moist, but not wet, towel. Many cleaning agents contain chemical
substances which may cause damage to the plastic parts of the machine. Therefore do not use
any strong or inflammable cleaners such as petrol, paint thinner, turpentine or similar cleaning
agents.
Always keep air ventilation holes free of dust deposits to prevent overheating.
Service
For more information on PT-1441A / PT-1441F and other products, please visit