Prokit's Industries MT-1620 - Manual (Page 38)

4.19 TEMPERATURE MEASURING
WARNING
To avoid electrical shock, do not connect
the thermocouples with the electriferous
circuit.
4.19.1 Set the transform switch at the desired ℃
range position.
4.19.2 The ‘LCD’ display will show the current
environment temperature.
4.19.3 when measuring the temperature with
thermocouple, ‘K’ type probe for this meter
can be used. Insert the black plug to the
COM jack and the red one to the jack,
℃
touch the end of the temperature sensor to
the area or surface of the object for
measurement.
4.19.4 You can get reading from LCD.
NOTE:
 With better hermetization, the meter’s
temperature measured circuit and environment
need a little longer time to reach heat balance, and
then accurate reading can be gotten.
- 37 -