Prokit's Industries MT-1620 User Manual

Page 34

overrange condition.

 For measuring resistance above 1M, the meter
may take a few seconds to get stable

reading.

4.14 CAPACITANCE MEASURING

WARNING

To avoid electric shock, be sure the

capacitors have been discharged fully

before measuring the capacitance of a

capacitor.

4.14.1 Connect the black test lead to the COM jack

and the red test lead to the

jack.

4.14.2 Set the transform switch at the



range position.

4.14.3 put down the "FUNC." transformed at

measurement.

4.14.4 Before connect test leads across two sides

of the capacitor under measurement, be
sure that the capacitor has been discharged
fully.

4.14.5 You can get reading from LCD.

NOTE:

 It takes certain time (200μF range 30 seconds) to

- 33-