Prokit's Industries MT-1232 - Manual (Page 3)

2
Open-package Inspection
Open the package box and take out the meter, check carefully
if the following accessories are missing or damaged. If there
is anything missing or damaged, please contact the distributor
immediately.
Digital multimeter 1 PC
User’s manual 1 copy
Test leads 1 pair
Temperature Probe (K-Thermocouple) 1 PC
Test Socket 1PC
Safety Note
The design of this meter is in accordance with IEC1010 clause
(the safety standard issued by International Electrotechnical
Commission). Prior to the operation of the instrument, please
read the safety considerations before use.
1. When DC voltage is above 30V, AC voltage above 25V,
current above 10mA, AC power line with inductive load or
power line during electric fluctuation is measured, please
beware of electric shock.
2. Prior to measurement, check if the measurement function
switch is at the correct position. Check if the test lead is
contacted reliably, connected correctly, and grounded well
etc. in order to avoid electric shock.
3. Only if the meter is used with the matched test lead, does it
meet the requirement of the safety standard. When the line
of the test lead is damaged, it is necessary to replace with
another one of the same model or the same electrical
specification.
4. Don’t use other unconfirmed or disapproved fuses to replace
the fuse inside the meter. Only the same model or same