Prokit's Industries MT-1232 - Manual (Page 16)

15
2-2-9. Temperature (˚C)
A) Rotate function switch to (˚C).
B) Insert the cathode (black pin) of cold end (free end) of
thermocouple into “COM” jack and anode into “ ”
terminal. Then put the working end (temperature
measurement end) of thermocouple on the surface or inside
the object to be tested. Then you can read temperature from
the screen, and the data is in Centigrade.
Caution:
1. When the input terminal is open-circuit, it will display the
normal temperature.
2. Don’t change the temperature probe at random, or the value
accuracy could not be guaranteed.
3. Don’t measure voltage at temperature range.
Range Accuracy Resolution
(-20~1000)˚C <400˚C±(1.0%+5d)
≥400˚C±(1.5%+15d)
1˚C
• Sensor: K Type Thermocouple (Nickel-chromium--nickel
silicon) (banana plug).
Caution: DO NOT INPUT VOLTAGE AT THIS RANGE!