Prokit's Industries MT-1610 - Manual (Page 9)

200M  range).
Note: On 200M  range, if short input, display will
read 1M , this 1M should be subtracted from
measurement results.
Overload Protection: 250V dc or 250V ac rms
4.5 DIODE/CONTINUTY
Range Description
Diode Shows
the approximate forward
voltage drop
Continuity Built – in buzzer will sound, if the
resistance under test is less than
about 70

Overload Protection: 250V dc or 250V ac rms
- 18 -
- 28 -
- 16-
5. BATTERY
 FUSE REPLACEMENT
If the sign“
”appears on the LCD display, it
indicates that battery should be replaced.
Remove screws on the back cover and open
the case (see the right photo). Replace the
exhausted battery with a new one.
Fuse rarely need replacement and blow almost
always as a result of the operator’s error. Open
the case as mentioned above, and then take
the PCB out from the front cover. Replace the
blown fuse with same ratings.
- 17-