Prokit's Industries SS-621 Series - Manual (Page 2)

Specification
Model No Setting Air Volume Temp.( ℃) Plug Type
I 200L/min 100℃~400℃
SS-621B
II 500L/min 100℃~650℃
I 200L/min 100℃~400℃
SS-621H
II 500L/min 100℃~650℃
IMPORTANT SAFETY
INSTRUCTIONS
Before using, please take a few minutes to read all instructions carefully and pay attention
to safety notices and warnings to ensure work safely. Keep these instructions for future
use.
WARNING
* To reduce risk of fire or electric shock, do not expose to rain or moisture. Store indoors.
* When servicing, use only identical replacement parts.
* Never use the heat not airflow toward people or animals.
* Never use the heat gun near flammable materials or gases.
* Never obstruct the hot airflow by blocking or covering the air outlet.
* Never touch the hot air nozzle, it becomes extremely hot.
* Wear protective work gloves at all times.
* Never touch the nozzle to any surface when running the gun or shortly after running.
* Always wear eye protection when removing paint from overhead positions.
* Do not wear loose-fitting clothing or jewelry. Wear nonskid footwear and protective cap to
wrap long hair.
* Maintain proper balance and footing at all times.
* Keep the gun handle dry, clean, and free from oil and grease.
* Do not force the tool or accessories, and use only for the purpose intended.
* Always stand gun in an upright position or hang it up by its convenient hanger.
* Never use in wet environments or areas of high humidity (for example: bathroom, steam
rooms, etc.)
* Never poke anything down inside the hot air nozzle.
* Always allow the heat gun to cool/down completely before storing it.
* Always store the gun in a safe place, out of the reach of children.
* Be aware of the work environment. Areas behind ceilings, floors, and soffits may contain
highly flammable materials. Always check these areas before applying heat.
* Keep work area with sufficient light.
* Guard against electric shock by preventing contact with grounded surfaces (for example:
pipes, radiators, ranges, refrigerator enclosures.)
* Never carry the gun by its power cord or yank the cord from an electrical outlet.
* Inspect extension cords periodically and replace of damaged.
* Inspect tool cords periodically, if the tool got damaged, please contact our authorized
service personnel.
* When using the tool outdoors, only employ extension cords intended for use outdoors
and marked "W-A"
SS-621Series User’s Manual 使用說明書 1