Prokit's Industries SS-820B - Manual (Page 13)

5 When cleaning is completed, unplug the power cord,
remove the lid and retrieve the items. Pour the water
out through the pouring recess. Clean and wipe the
tank.
CARE AND MAINTENANCE
1
Do not turn on the unit without water in the tank.
Even though the unit is designed with multiple protections, if it is
turned on for over 30 seconds without water in the tank, it may
damage the unit or severely reduce the life of the unit.
Do not run the unit for extended time or continuously.
The unit is designed with overheat protection. If the unit has been
running for 45 minutes, it is recommended to stop the unit for
about 20 minutes to prolong the life of the unit.
Do not keep water in the cleaning tank for a long time.
After cleaning is completed, unplug the power cord then pour the
water out through the pouring recess. Avoid getting the water
inside the housing through the vents and causing damage.
Do not spray water over the housing.
Use a towel to wipe the tank and the housing.
Do not expose the unit under direct sun shine for a long.
Keep the unit in a dry, cool and ventilated area.
11