Prokit's Industries SS-803F - Manual (Page 7)

DEFAULT TIME INTERVALS
At the factory there are five times intervals that have been preset for this device.
180 seconds:
The standard time for normal degrees of soiling. The specified time appears automatically
in the time display if:
a. the device is connected to the power supply
1
b. the set button is pressed for the first time for a new cleaning procedure.
300 seconds:
Recommended for the first cleaning of objects that have not been cleaned for a long time.
480 seconds:
Recommended for the first cleaning when several objects are cleaned together.
090 seconds:
Recommended for very light soiling or when a second brief cleaning procedure is required.
If the water is found to be dirty, the liquid has to be replaced. In order to remove any resi-
dual soiling on the surface you should clean the item again for 90 seconds in the fresh liquid
600 seconds:
Recommended in order to intensify the cleaning effect.
Note: If the cleaning time is too long it is possible that fittings, stickers and decorations that
are loosely attached to objects, as well as other loose parts, e.g. screws on/in spectacles, may
become detached during the cleaning process.
6