KIA Rondo 2014 User Manual

Page 488

Maintenance

Waxing

Wax the vehicle when water will no
longer bead on the paint.
Always wash and dry the vehicle
before waxing. Use a good quality
liquid or paste wax, and follow the
manufacturer’s instructions. Wax all
metal trim to protect it and to main-
tain its luster.
Removing oil, tar, and similar materi-
als with a spot remover will usually
strip the wax from the finish. Be sure
to re-wax these areas even if the rest
of the vehicle does not yet need wax-
ing.

CAUTION

• Water washing in the engine

compartment including high
pressure water washing may
cause the failure of electrical
circuits located in the engine
compartment.

• Never allow water or other liq-

uids to come in contact with
electrical/electronic compo-
nents inside the vehicle as
this may damage them.

OJB037800

WARNING -

Wet brakes

After washing the vehicle, test
the brakes while driving slowly
to see if they have been affected
by water. If braking performance
is impaired, dry the brakes by
applying them lightly while
maintaining a slow forward
speed.