KIA Rondo 2014 User Manual

Page 26

Safety features of your vehicle

Walk-in seat
(2nd row seat, if equipped)

To get in or out of the 3rd row seat,
1. Route the seat belt webbing

through the rear seat belt guide clip.
After inserting the seat belt, tighten
the belt webbing by pulling it up.

2. Pull up the walk-in lever (1) on the

2nd row seatback.

3. Fold the 2nd row seatback and

push the seat to the farthest for-
ward position (2).

After getting in or out, slide the 2nd
row seat to the farthest rearward
position and pull the seatback firm-
ly backward until it clicks into
place. Make sure that the seat is
locked in place.

Folding the rear seat

The rear seatbacks can be folded to
facilitate carrying long items or to
increase the luggage capacity of the
vehicle.

WARNING

Never attempt to adjust the 2nd
row seat while the vehicle is
moving or the seat is occupied
as the seat may suddenly move
and cause the passenger on the
seat to be injured.

WARNING

The purpose of the fold-down
rear seatbacks is to allow you to
carry longer objects that could
not be accommodated in the
cargo area.
Never allow passengers to sit
on top of the folded down seat-
back while the vehicle is mov-
ing. This is not a proper seating
position and no seat belts are
available for use. This could
result in serious injury or death
in case of an accident or sud-
den stop. Objects carried on the
folded down seatback should
not extend higher than the top
of the front seatbacks. This
could allow cargo to slide for-
ward and cause injury or dam-
age during sudden stops.

ORP032055

ORP033026N