KIA Rondo 2014 User Manual

Page 117

Features of your vehicle

And if the power window switch is
pulled up continuously again within 5
seconds after the window is lowered
by the automatic window reversal
feature, the automatic window rever-
sal will not operate.

✽

NOTICE

The automatic reverse feature for
the driver’s window is only active
when the “auto up” feature is used
by fully pulling up the switch. The
automatic reverse feature will not
operate if the window is raised using
the halfway position on the power
window switch.

Power window lock button

• The driver can disable the power

window switches on the rear pas-
senger doors by pressing the
power window lock button located
on the driver’s door to the LOCK
position (pressed).

• When the power window lock

switch is pressed :
- The driver's master control can

operate all the power windows.

- The front passenger's control can

operate the front passenger's
power window.

- The rear passenger's control can-

not operate the rear passenger's
power window.

WARNING

Always check for obstructions
before raising any window to
avoid injuries or vehicle damage.
If an object less than 0.16 in. (4
mm) in diameter is caught
between the window glass and
the upper window channel, the
automatic reverse window may
not detect the resistance and will
not stop and reverse direction.

ORP042014L