KIA Rondo 2014 - Manual (Page 247)

Features of your vehicle
160 4
Portable lamp usage
(if equipped)
1. In-vehicle lamp, if necessary, after
separation can be used as a
portable.
2. Press push button (1).
3. Pull out the lamp holder.
4. Press the power switch (2).
❈
If the portable lamp does not turn
on, it means the portable lamp
needs to be charged. Insert the
lamp holder and then charge it
again. The charge mode will be
activated if the ignition switch (or
engine start/stop button) is on
position or engine is running.
ORP043137C
CAUTION
1. Remove the batteries when
not in use for a long time.
2. Use the specified battery.
3. You can use the regular bat-
teries (Disposable batteries)
but do not use the Non-
rechargeable battery in
charge mode. It may damage
the vehicle.
4. Do not place the lamp with
water or moist places and liq-
uid compounds. These can
cause internal leakage of a
battery.
(Continued)
(Continued)
5. When replacing the batteries,
check the direction and insert.
It will not be charged if installed
reversely.
6. Do not mix the rechargeable
batteries.
It may not be charged normally.
7. Do not place the lamp or bat-
teries near fire or heat. It can
cause internal leakage of a
battery.
8. Do not apply electrical shock
with portable charging termi-
nals of the lamp.
It can cause internal leakage
of a battery or damage the
portable lamp.
9. If the portable lamp does not
turn on anymore after
charged,
replace the
rechargeable batteries.