Peerless-AV HDS-IWK-200 - Installation - Manual (Page 15)

15 of 24 ISSUED: 08-23-12 SHEET #: 180-9027-2 10-30-12
If you have any questions, please call Peerless customer care at 1-800-865-2112.
DISPLAY
MULTI-WASHER
SCREW
TILT BRACKET
fi g. 2.5
SPACER
Begin with longer length screw, hand thread through multi-washer, tilt bracket and spacer in that order into
display as shown below. Screw must make at least three full turns into the mounting hole and fi t snug into place.
Do not over tighten. If screw cannot make three full turns into the display, select a shorter length screw from the
baffl ed fastener pack. Repeat for remaining mounting holes, level brackets and tighten screws.
Skip to step 5.
2-4