Peerless-AV HDS-IWK-200 - Installation - Manual (Page 12)

12 of 24 ISSUED: 08-23-12 SHEET #: 180-9027-2 10-30-12
Position the wireless receiver assembly (A) and power module assembly (B) approximately 1/4" from the
universal adapter as shown. Once in position, tighten the four 1/4-20 decorative screws (C) using using 4mm
allen wrench (H) and a 7/16" open end wrench.
Skip to step 5.
1/4" 1/4"
C
C
DISPLAY
A
B
1-15
UNIVERSAL ADAPTER
PLATE