Peerless-AV MSA-101S - Installation - Manual (Page 3)

ISSUED: 12-19-05 SHEET #: 087-9013-4 05-10-06
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
3 of 4
Note: some parts may not
appear exactly as illustrated.
Installation directly to screen
2-2
Place interface bracket (B) between screen and mount. Attach interface bracket (B) to mount and screen using fasten-
ers provided with mount. Refer to mount instructions for installation of screen. Tighten all screws securly.
Note: For installation of tear drop locking tab (N) reference SP-850 instruction sheet.
B
SCREEN
MOUNT
Note: Roll can be adjusted 1° clockwise
or counterclockwise. To adjust roll,
loosen screen fasteners slightly, leaving
them snug. Level screen, then tighten
screen fasteners.
Attach interface bracket (B) onto center speaker mount (A) using four M5 x 6 mm socket pin serrated washer head
screws (D). Adjust form brackets to best fit your screen size. Tighten screws using 4 mm security allen wrench (L).
Note: For best results use holes closest to the edge of the form brackets as shown below.
Note: Adapter plate, screen, and mount not shown for clarity.
B
A
D
3