Peerless-AV PRS45 - Installation - Manual (Page 2)

ISSUED: 07-31-01 SHEET #: 055-9029-5 08-05-04
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
2 of 2
Slide both horizontal slides (B) inward until left and
right sides are against projector (as shown). Fasten
with four M6 screws (D), lock washers (H), and flat
washers (G). Note: Be sure to center top plate (A).
Tighten using 4 mm security allen wrench (F).
Slide top assembly downward until top and bottom sides
are against projector (as shown). Fasten with four M6
screws (D), lock washers (H), and flat washers (G). Tighten
using 4 mm security allen wrench (F).
B
D
D
F
F
G
H
G
H
© 2004 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.