Peerless-AV PSTK-2955-W - Installation - Manual (Page 9)

Visit the Peerless Web Site at www.peerless-av.com 9 of 9 ISSUED: 03-26-09 SHEET #: 055-9259-7 04-25-13
Routing Cables through PRGS projector mount and wall arm assembly: Guide projector cables into
openings in projector mount and wall arm assembly as shown below. Insert Tube Cap (F) into end of adjustment
tube (B).
Note: Cables must be removed from projector before routing through wall arm.
Note: Follow projector mount (PRGS) instructions to install projector.
Routing Cables
© 2013, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Peerless Industries, Inc.
2300 White Oak Circle
Aurora, Il 60502
www.peerless-av.com
4
B
F
PROJECTOR CABLES