PowerWalker SNMP Manager User Manual
Page 2
3
．
．
．
．
Configuration
a)
Please install SNMP web manager software in your PC. After software is
installed successfully, the Installer will leave a shortcut icon on
your desktop.
Chart 3-1
b)
Enter specific IP address to search all SNMP devices in LAN. (The SNMP
web manager will automatically collect the IP address from sever by
default via a DHCP server. It will apply default IP address of
192.168.102.230, default subnet mask as 255.255.255.0, and default
gateway as 0.0.0.0 without a DHCP server.
Chart 3-2
c)
User can modify IP setting, online upgrade, password management, and
static trap address setting in SNMP Web Manager interface. It is
necessary to enter password for any medications. The default password is
12345678.
4. Monitoring
Double click the selected device from the device list (refer to Chart 3-2) to open
web page as Chart 4-1.
Chart 4-1
Please check SNMP Web Manager User Manual for detailed configuration.