PowerWalker VI 1000 IEC - Manual (Page 2)

PowerWalker VI series is an intelligent and compact line interactive UPS which is
designed to protect your personal computer or sensitive electronic equipments. The UPS is
equipped with advanced microprocessor controlled and included built-in boost and buck
AVR to prevent the equipment damage and data loss. The UPS can be automatically started
up without AC power supplied. The special feature is that hot-swappable/user replaceable
battery is easy to replace or change in case of battery. In addition, this UPS provides
advanced modem or telephone line surge protection, and the small footprint tower design
can be placed on your desk space or floor. It is equipped with many features that allow
any attached equipment to operate longer and more reliability. PowerWalker VI series
protects computer systems, servers, storage systems, and network peripherals from
blackouts, power surges, and spikes.
Description of Features:
Compact size and light weight design which can be placed on the cabinet or desk
Utilized microprocessor control to maximize the reliability and efficiency
Equipped with built-in boost and buck AVR to prevent the equipment damage
and data loss
Cold start capability enables UPS can be automatically turned on in battery
mode during blackout
Include discharge, overcharge, and overload protection
Provides advanced telephone/fax or modem surge suppression protection
Built-in RS-232 with connecting intelligent monitoring software
User-replaceable batteries allow on-site battery replacement
USB available(optional)
Please save this manual properly. This manual includes important safety
information. Please read it carefully and thoroughly before operating the UPS.
Comply with all the warnings and operating instructions on the unit and in the
manual strictly.
To reduce the risk of electric shock, the user must disconnect the UPS from the mains
supply before installing any cable.
To reduce the risk of electric shock. Do not attempt to disassemble the UPS. This
UPS is no user serviceable parts inside. Please contact qualified service personnel
to do any service.
Do not connect with laser printers, cosmetic appliances, medical equipments,
microwave ovens, vacuum cleaners or heavy duty hardware to UPS because they
take too much power.
Do not dispose of batteries in a fire. They may explore.
Do not open or mutilate batteries. They contain an electrolyte that is toxic and
harmful to the skin and eyes.
Do not allow liquid or foreign object to enter inside of UPS.
Do not block off ventilation openings in the UPS system’s housing.
Do not place the UPS near water or in environments of excessive humidity.
Remove personal metal items such as rings, bracelets, necklaces, and watches when
working with batteries. Batteries can produce a short-circuit current high enough to
make metal melt, and could cause severe burns.
When replacing batteries, replace with the same number of the sealed lead-acid
batteries.
1. INTRODUCTION 2. SAFETY REQUIREMENTS