PowerWalker Battery Pack for VFI 10000R LCD - Manual (Page 12)

11
EN
3. Operations
3-1. Button Operation
Button Function
ON/Enter Button
 Turn on the UPS: Press and hold the button more than 0.5s to turn on the UPS.
 Enter Key: Press this button to confirm the selection in setting menu.
OFF/ESC Button
 Turn off the UPS: Press and hold the button more than 0.5s to turn off the UPS.
 Esc key: Press this button to return to last menu in setting menu.
Test/Up Button
 Battery test: Press and hold the button more than 0.5s to test the battery while in AC
mode, or CVCF mode.
 UP key: Press this button to display next selection in setting menu.
Mute/Down Button
 Mute the alarm: Press and hold the button more than 0.5s to mute the buzzer.
Please refer to section 3-4-9 for details.
 Down key: Press this button to display previous selection in setting menu.
Test/Up +
Mute/Down Button
 Press and hold the two buttons simultaneous more than 1s to enter/escape the
setting menu.
* CVCF mode means converter mode.
3-2. LED Indicators and LCD Panel
LED Indicators:
There are 4 LEDs on front panel to show the UPS working status:
Mode LED Bypass Line Battery Fault
UPS Startup ● ● ● ●
Bypass mode ● ○ ○ ○
AC mode ○ ● ○ ○
Battery mode ○ ○ ● ○
CVCF mode ○ ● ○ ○
Battery Test ● ● ● ○
ECO mode ● ● ○ ○
Fault ○ ○ ○ ●
Note:
●
means LED is lighting, and
○
means LED is faded.
LCD panel
LED indicators