Yamaha CLP-970A - Manual (Page 86)

86
CLP-970A
Message List
The messages are listed in alphabetical order.
Message Meaning
This message is displayed following the message “BulkDataReceiving Song/
Voice.” Receiving bulk data is complete. After this message appears, you can
proceed to the next step.
Receiving bulk data has failed. Check the parameter settings and try again.
The Clavinova is receiving the song bulk data while this message is dis-
played. Wait until the message disappears, then proceed to the next step.
The Clavinova is receiving the voice setting bulk data while this message is
displayed. Wait until the message disappears, then proceed to the next step.
You have cancelled the “SongBulkDump” (page 80) or “VoiceBulkDump”
(page 80) transmission by pressing the B [–(NO)] button.
This message is displayed following the message “Executing.” The Clavi-
nova’s internal processing is complete. You may proceed to the next step.
You tried to save a song by changing its title (using the “RenameSong” (page
52), or “SaveToMemory” (page 50), but a song with the same name already
exists in memory. Three seconds after this message appears, the previous
screen is restored. Rename the song.
This message prompts you to execute a file-related operation. Press the B [+
(YES)] button to proceed, or press the [EXIT] button to cancel.
The Clavinova is processing the data internally. Wait until the message dis-
appears, then proceed to the next step.
The normal (factory default) settings (except for the memory song setting)
(“FactorySet” on page 85) have been restored. This message also appears if
you press and hold down the C7 key and turn on the power to the Clavinova
(page 85).