Yamaha CLP-970A - Manual (Page 84)

84
CLP-970A
Other settings
You can specify how far down you should press on the
right pedal until the damper effect (page 29) starts
working. This setting is effective when the right pedal
function (page 75) is set to either SustainCont or Sus-
tain.
See the procedure on page 66.
Setting range:
–2 (effective with the shallowest press) - 0 - +2 (effec-
tive with the deepest press)
This parameter enables you to set the range of continu-
ous pitch change made by the Pitch Bend function.
• This parameter is effective only on the keyboard
performance sound.
• You can set the range in semitone steps.
See the procedure on page 66.
Setting range:
–12 (Pitch is lowered by 12 semitones [one octave]
when you press the pedal.) - +12 (Pitch is raised by 12
semitones [one octave] when you press the pedal.)
Normal setting:
–2
You can connect your computer or sequencer to the
MIDI IN or TO HOST connector on the CLP-970A to
play “GM System Level 1” or “XG”-conformed music
data on the CLP-970A, and control it from a connected
computer or sequencer.
The CLP-970A provides the XG tone generator for the
purpose of playing GM or XG music data. You can
replace some XG voices with the preset voices on the
panel for playback. This parameter enables you to
select “Native” (using the preset voices) or “XG” (using
the XG voices).
See the procedure on page 66.
Setting for:
All preset voices on the panel
Setting range:
Native Using the preset voices
XG
Using the XG voices
Normal setting:
GrandPiano1 Native (using the preset voices)
Other voices XG (using the XG voices)
Setting the point at which the
damper pedal starts to affect the
sound [HalfPedalPoint]
Pitch bend range
[PitchBendRange]
A B
C D
NO YES
A B
C D
NO YES
Replacing the XG voices with pre-
set voices [XGAlternative]
A B
C D
NO YES
Select the desired item. Select on or off.