BabyTrend 1871CT - SPUNKY TRAVEL SYSTEM User Manual

Page 15

a. For the 5-point harness models, place seat pad on Safety

Seat, threading the Harness straps through the Pad bottom
slots and pulling the Buckle through the opening at the rear
of the flap on Pad. Thread the Harness Straps through
Buckle Tongues and Harness-Tie. See section Adjustment
of the Shoulder Straps for re-threading of shoulder straps.

b. To re-install the Harness straps on the adjustable seat back

model, move the Seat Back to its highest positition, then
follow steps iii - ix of section Adjustment of the Shoulder
Straps.

c. For the EZ5 harness Safety Seat, pull the Buckle through

the opening at the rear of the flap on Pad. Place the seat
pad on the Safety Seat and see section Adjustment of the
Shoulder Straps for re-threading of shoulder straps.

Inspect the Harness Straps from the front and rear to ensure
that they are not twisted. Twisted straps can prevent proper
tightening of the Harness and thus may not adequately
restrain your child in a sharp turn, sudden stop or crash.
Before using the Safety Seat, please pull on the Harness
Straps from the front to ensure that they are securely
re-attached.

If You Need Help or Replacement Parts

Please call our Customer Service department at (800) 328-7363

between the hours of 8:00 am and 4:30 pm, Pacific Coast Time,

Monday through Friday.