BabyTrend 8625 - LAUREL OAK HIGH CHAIR - Manual (Page 5)

12. Repeat this step on the left side height bracket. See figure 13.
13. Insert the leg into the ends of the front tube of both the right
and left upper frame assemblies as shown in figure 14.
14. Insert another leg into the ends of the rear tube of both the right
and left upper frame assembly as shown in figure 15.
15. Attach each of the casters to the high chair feet as shown
in figure 16. Snap casters into bottom of the foot. Casters
with brakes can be installed on front or rear legs (rear leg
recommended). Check that all four casters are securely
fastened to the high chair.
16. Flip over tray to attach the crotch retainer. The molded plastic
housing must be oriented by facing the slot toward front of the
tray. Insert the 2 provided (3.5mm x 10) screws and tighten.
DO NOT OVER-TIGHTEN . See figure 17.
Foot
Caster
Figure 14
Figure 15
Figure 16
Caster
Foot
Figure 13
Figure 12
Figure 17
5