BabyTrend 8625 - LAUREL OAK HIGH CHAIR - Manual (Page 7)

TO USE SAFETY BELT
The tray is not designed to hold the child in the chair. Always keep
child in view while in high chair. Never leave child unattended.
Step 1.
Place your child’s arms through the loops formed by the shoulder and
waist straps. Place the crotch strap between your child’s legs. Insert
the buckles into the center buckle to fasten. (see Fig. 5)
Step 2.
Adjust shoulder and waist straps for your child’s comfort and safety
by sliding buckles in either direction. Safety straps are to fit snug
around your child.
TO RELEASE SAFETY BELT
Step 1.
Squeeze sides of buckles to release. (see Fig. 6)
WARNING:
Do not adjust seat height
with child in seat. Adjust seat height before plac-
ing your child in the high chair.
TO ADJUST SEAT HEIGHT
Step 1.
Squeeze the buttons on the height adjustment bracket and adjust to the
ideal position. (see Fig. 7)
WARNING:
Always check that the
height adjustment bracket is level and both left
and right sides locked before placing child in the
high chair.
TO FOLD HIGH CHAIR
The high chair may be folded with the seat in any of the height
positions. The high chair will be the most compact with the seat in
the lowest position.
Step 1.
Place seat in the desired height position (see Fig. 7).
Step 2.
Place seat back in the most upright position. (see Fig 4).
Step 3.
Squeeze the tray release handle and slide the tray out. (see Fig 2).
Hang the tray on the hooks located on the back of the rear leg.
(see Fig. 8)
Step 4.
Pull upward on the release levers (located on the sides of the frame)
and push the rear legs in the direction of the front legs until folded.
(see Fig. 9) Chair is now ready to put away. DO NOT allow your
child to play around a folded high chair as it may fall.
Adjust for a snug fit
6-position
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
7