Rainbow Electronics MAX2374 - Manual (Page 2)

MAX2374
SiGe, Variable IIP3, Low-Noise Amplifier
in UCSP Package
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
DC ELECTRICAL CHARACTERISTICS
(V CC = +2.7V to +5.5V, R BIAS = 20k Ω, V
GAIN = high, LNAOUT = V CC , no input signals at LNAIN, T A = -40°C to +85°C. Typical values
are at V CC = +2.75V, T A = +25°C, unless otherwise noted.) (Note 1)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
V CC to GND ...........................................................-0.3V to +6.0V
GAIN, BIAS Voltage to GND...................-0.3V to (V CC + 0.3V)
GAIN, BIAS Current ......................................................±10mA
RF Input Power
LNAIN .........................................................................+10dBm
LNAOUT to GND ....................................-0.3V to (V
CC + 0.6V)
Continuous Power Dissipation (T A = +85°C) ...................540mW
Operating Temperature Range
MAX2374 .........................................................-40°C to +85°C
Storage Temperature.........................................-65°C to +150°C
Junction Temperature ......................................................+150°C
V CC = 2.75V
GAIN = 0.6V, V CC = 2.75V
BIAS = open circuit
V CC = 5.5V
R BIAS = 10k Ω
R BIAS = 43k Ω
CONDITIONS
V
V CC -
1.16
BIAS Pin Voltage (Note 2)
µA -5 5 Input Current
V 0.6 Input Logic Voltage Low
V 1.5 Input Logic Voltage High
µA 0.1 1 Shutdown Supply Current
8.5 10.5
V 2.7 5.5 Supply Voltage
mA
4.5 5.5
Supply Current
10.5
15
4.5
UNITS MIN TYP MAX PARAMETER
AC ELECTRICAL CHARACTERISTICS
(Typical Application Circuit, V CC = +2.7V to +5.5V, P LNAIN = -30dBm, V GAIN = high, f LNAIN = 881MHz, R BIAS = 20k Ω, T
A = +25°C.
Typical values are at V CC = +2.75V, unless otherwise noted.) (Note 2)
V CC = 2.75V
All modes, f ≤ 6.5GHz
Input and output ports externally matched to 50 Ω
V GAIN = high
CONDITIONS
10:1 Maximum Stable Load VSWR
MHz 750 1000
Recommended Operating Frequency
Range (Note 3)
dBm
-3.5
Output 1dB Compression
dB 14 Input and Output Return Loss
-20
6
UNITS MIN TYP MAX PARAMETER
V GAIN = high
V GAIN = low
V GAIN = low
dB
-9
Reverse Isolation
SUPPLY
GAIN CONTROL INPUT