Rainbow Electronics DS1620 User Manual
Ds1620 digital thermometer and thermostat, Features, Pin assignment pin description
![background image](/manuals/281408/1/background.png)
1 of 13
072099
FEATURES
§ Requires no external components
§ Supply voltage range covers from 2.7V to
5.5V
§ Measures temperatures from -55°C to +125°C
in 0.5°C increments; Fahrenheit equivalent is
-67°F to +257°F in 0.9°F increments
§ Temperature is read as a 9-bit value
§ Converts temperature to digital word in 1
second (max)
§ Thermostatic settings are user-definable and
nonvolatile
§ Data is read from/written via a 3-wire serial
interface (CLK, DQ,
RST
)
§ Applications include thermostatic controls,
industrial systems, consumer products,
thermometers, or any thermally sensitive
system
§ 8-pin DIP or SOIC (208-mil) packages
PIN ASSIGNMENT
PIN DESCRIPTION
DQ
- 3-Wire Input/Output
CLK/
CONV
- 3-Wire Clock Input and
Stand-alone Convert Input
RST
- 3-Wire Reset Input
GND
- Ground
T
HIGH
- High Temperature Trigger
T
LOW
- Low Temperature Trigger
T
COM
- High/Low Combination Trigger
V
DD
- Power Supply Voltage (3V - 5V)
DESCRIPTION
The DS1620 Digital Thermometer and Thermostat provides 9–bit temperature readings which indicate
the temperature of the device. With three thermal alarm outputs, the DS1620 can also act as a thermostat.
T
HIGH
is driven high if the DS1620’s temperature is greater than or equal to a user–defined temperature
TH. T
LOW
is driven high if the DS1620’s temperature is less than or equal to a user–defined temperature
TL. T
COM
is driven high when the temperature exceeds TH and stays high until the temperature falls
below that of TL.
DS1620
Digital Thermometer and Thermostat
www.dalsemi.com
6
3
1
2
4
8
7
5
DQ
CLK/CONV
RST
GND
V
DD
T
HIGH
T
LOW
T
COM
DS1620S 8-Pin SOIC (208-miil)
See Mech Drawings Section
6
3
1
2
4
8
7
5
DQ
CLK/CONV
RST
GND
V
DD
T
HIGH
T
LOW
T
COM
DS1620 8-Pin DIP (300-mil)
See Mech Drawings Section