beautypg.com

General description, Features, Isd2100 datasheet – Rainbow Electronics ISD2100 User Manual

Page 3

background image

ISD2100 DATASHEET

Publication Release Feb 9, 2010

- 3 -

Revision 0.51

1

GENERAL DESCRIPTION

The ISD2100 is a digital ChipCorder

®

featuring digital de-compression, comprehensive memory

management, flash storage, and integrated digital audio signal paths. This family utilizes flash
memory to provide non-volatile audio playback with duration up to 30 seconds (based on 8kHz/4bit
ADPCM) for a single-chip solution.
Unlike the MLS ChipCorder series, this device provides higher sampling frequency and a signal path
with SNR equivalent to 12-bit resolution.
The ISD2100 can take digital audio data via SPI interface. When SPI interface is chosen, the sample
rate of the audio data sent must be one of the ISD2100 supported sample rates.

The ISD2100 has built-in speaker driver output.

2

FEATURES

• Duration

o

30 seconds based on 8kHz/4bit ADPCM (ISD2130)

• Audio Management

o

Store pre-recorded audio (Voice Prompts) using high quality digital compression

o

Use a simple index based command for playback

o

Execute pre-programmed macro scripts (Voice Macros) designed to control the configuration

of the device and play back Voice Prompts sequences.

• Sample Rate

o

7 sampling frequencies such as 4, 5.3, 6.4, 8, 12.8, 16 and 32 kHz are available.

• Compression Algorithms

o

µ-Law: 6, 7 or 8 bits per sample

o

Differential µ-Law: 6, 7 or 8 bits per sample

o

PCM: 8, 10 or 12 bits per sample

o

Enhanced ADPCM: 2, 3, 4 or 5 bits per sample

o

Variable-bit-rate optimized compression. This allows best possible compression given a

metric of SNR and background noise levels.

• Oscillator

o

Internal oscillator with internal reference: with ±1% deviation at room temperature.

• Output

o

PWM: Class D speaker driver to direct drive an 8

Ω speaker or buzzer

• I/Os

o

SPI interface: MISO, MOSI, SCLK, SSB for commands and digital audio data

o

6 general purpose I/O pins that share SPI interface.

• One 8-bit Volume Controls set by SPI command.

• Operating Voltage: 2.7-3.6V

• Package: green, 20L-QFN

• Temperature Options:

o

Industrial: -40

°C to 85°C