Rainbow Electronics GT864-PY User Manual
Page 13
GT864-QUAD/PY Hardware User Guide
1vv0300756
Rev.0 08/ 05/07
Reproduction forbidden w ithout Telit Communications S.p.A. w ritten authorization - All Rights Reserved
page 13 of 23
All inputs are under control of an embedded application script or AT commands.
The following AT commands have to be used to initialise and to read the status of the GPIOs:
AT#GPIO=11,2,0 (read GPIO11, PIN1 Mini USB)
AT#GPIO=12,2,0 (read GPIO12, PIN2 Mini USB)
AT#GPIO=13,2,0 (read GPIO13, PIN3 Mini USB)
AT#GPIO=14,2,0 (read GPIO14, PIN4 Mini USB)
See also other documents in the category Rainbow Electronics GPS receiver:
- BT-R900 (2 pages)
- BT-R800 (2 pages)
- UC864 (36 pages)
- BT-R920 (2 pages)
- GM862-GPS (100 pages)
- GM862-GPS (73 pages)
- GM862-GPS (120 pages)
- GM862-QUAD-PY (434 pages)
- GM862-QUAD-PY (68 pages)
- GM862-QUAD-PY (96 pages)
- GM862-QUAD-PY (63 pages)
- WE865-DUAL (22 pages)
- CF-R900 (2 pages)
- BT-R820 (2 pages)
- GT863-PY (50 pages)
- ATR0610 (13 pages)
- FARGO MAESTRO 100 (with TCP_IP) (787 pages)
- FARGO MAESTRO 100 (with TCP_IP) (16 pages)
- ATR0622 (26 pages)
- EB-A803 (9 pages)
- GE863-GPS low power (122 pages)
- EB-A801 (18 pages)
- GE863-PRO3 (55 pages)
- L10 (2 pages)
- GM-R800 (2 pages)
- GE863-PY (80 pages)
- ATR0600 (11 pages)
- GM-R305 (3 pages)
- GM-R900 (2 pages)
- ATR0630 (35 pages)
- DL-200BT-D (3 pages)
- DL-200 (3 pages)
- ATR0601 (17 pages)
- ATR0620 (15 pages)
- ATR0625 (26 pages)
- MG260 (87 pages)
- MG260 (246 pages)
- DL-100 (3 pages)
- GM-R500 (2 pages)
- EB-A802 (9 pages)
- ATR0621 (20 pages)
- EB-230 (10 pages)
- GM-R306-AA (2 pages)
- 900 (239 pages)