Rainbow Electronics MAX7452 - Manual (Page 2)

MAX7450/MAX7451/MAX7452
Video-Signal Conditioners with AGC and
Back-Porch Clamp
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(V SUPPLY = ±5V ±5% (MAX7450), V SUPPLY = ±3.3V ±5% (MAX7451), V SUPPLY = +5V ±5% (MAX7452), R L =150 Ω to GND, C
L = 0 to
20pF, GSET = 1, AGCD = 1, T A = T MIN to T MAX , unless otherwise noted. Typical values are at T A = +25 °C.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
V CC to GND
MAX7450/MAX7452...........................................................+6V
MAX7451 ...........................................................................+4V
V SS to GND
MAX7450.............................................................................-6V
MAX7451.............................................................................-4V
OUT
MAX7450/MAX7451 ..........................................-2.5V to +3.5V
MAX7452 ................................................-0.3V to (V
CC + 0.3V)
GSET, AGCD, LOS .....................................-0.3V to (V CC + 0.3V)
All Other Pins
MAX7450/MAX7451...................(-0.3V + V SS ) to (V CC + 0.3V)
MAX7452 ................................................-0.3V to (V CC + 0.3V)
Maximum Current into Any Pin ............……………………±50mA
Continuous Power Dissipation (T
A = +70°C)
8-Pin SO (derate 18.9mW/°C above +70°C)..............1509mW
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Junction Temperature ......................................................+150°C
Lead temperature (soldering, 10s) ..................................+300°C
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
MAX7450/MAX7451, relative to GND ±50
Clamp Accuracy
MAX7452, relative V BPLVL = 1.5V ±50
mV
GSET = 0 1.0 3.0
Back-Porch Level Input Range V
BPLVL
MAX7452
GSET = 1 1.2 2.4
V
Clamp Response Time t CLAMP
Blanking level at the output to 1% of final
value
70 Lines
GSET = 0, relative
to V
OUT = 1V P-P
±10
AGC Accuracy
AGCD = 0,
V
IN = 0.5V P-P to 2V P-P GSET = 1, relative
to V
OUT = 2V P-P
±10
%
AGC Input Range AGCD = 0, relative to V IN = 1V P-P -6.0 +6.0 dB
Gain Flatness G F f = 5MHz relative to 100kHz -0.3 +0.3 dB
Noise-Filter Cutoff Fc 10 MHz
GSET = 0 0.95 1 1.05
Low-Frequency Gain f = 100kHz
GSET = 1 1.85 2 2.05
V/V
Group-Delay Deviation ∆t
G 3.58/4.43MHz relative to 100kHz 15 ns
Differential Gain dG Five-step modulated staircase (V IN = 1V P-P ) 0.2 0.6 %
Differential Phase d θ Five-step modulated staircase (V IN = 1V P-P ) 0.2 0.6 Degrees