TC Electronic M2000 - Manual (Page 15)

15
Press the Level key to access this menu.
These global level controls should be set to optimize the performance of the 24bit AD converter in the M2000.
The Level bars can be controlled individually or in common.
Mark the level bar you want to control using the cursor keys, and turn ADJUST to change value.
For common control the marker should be set between the two Level bars.
Note that the Digital In Level is capable of +6 dB gain.
Digital input gain
Place cursor between L and R to adjust simultaneously
Input gain
and sensitivity
(Consumer/PRO)
Output gain
and level
(Consumer/PRO)
LEVEL MENU
Ranges
Analog Inputs
Consumer range: -16dB to +10dB
Professional range: -6dB to +16dB
Analog Outputs
Consumer range: -10dB to +16dB
Professional range: -16dB to +6dB
Digital Input Level
Adjust the Digital Input from: Off to +6dB.
Auto level
Press SHIFT and AUTO LEVEL to activate function.
Send your expected source into the M2000 and press Auto Level
(Shift-Levels) to optimize your Input level automatically. The
M2000 will perform a measure for about five seconds and then
adjust the Input level giving you about 6 dB of headroom.