TC Electronic TouchMonitor User Manual
Page 34
Specifi cations (Extract)
EN-34
Manual | TouchMonitor TM7/TM9
Digital Inputs
HW20711:
4 AES3 inputs (transformer balanced, 110 ), 25-pin
Sub-D-F connector with 4 inputs and 4 outputs
HW20712:
4 AES3id inputs (unbalanced, 75 ), 8 BNC-F connectors
with 4 inputs and 4 outputs
HW20714:
4 AES3 inputs (transformer balanced, 110 ), 25-pin
Sub-D-F connector with 4 inputs and 4 outputs and 3G-SDI
interface with BNC-F connectors In and Through
HW20715:
8 AES3 inputs (transformer balanced, 110 ), 2 x 25-pin
Sub-D-F connector with 4 inputs and 4 outputs each
HW20911:
4 AES3 inputs (transformer balanced, 110 ), 25-pin
Sub-D-F connector with 4 inputs and 4 outputs
HW20912:
4 AES3id inputs (unbalanced, 75 ), 8 BNC-F connectors
with 4 inputs and 4 outputs
HW20913:
8 AES3 inputs (transformer balanced, 110 ), 2 x 25-pin
Sub-D-F connector with 4 inputs and 4 outputs each
HW20914:
8 AES3id inputs (unbalanced, 75 ), 16 BNC-F connectors
with 8 inputs and 8 outputs
HW20930:
3G-SDI interface with BNC-F connectors In and Through
Sampling rates:
44.1, 48, 96 kHz, synchronisation via digital input signal
Digital Outputs
HW20711:
4 AES3 outputs, 25-pin Sub-D-F connector (4 in, 4 out)
HW20712:
4 AES3id outputs, 8 BNC-F connectors (4 in, 4 out)
HW20714:
4 AES3 outputs, 25-pin Sub-D-F connector (4 in, 4 out) and
3G-SDI interface with BNC-F connectors In and Through
HW20715: 8
AES3
outputs, 2 x 25-pin Sub-D-F connector (4 in, 4 out each)
HW20911:
4 AES3 outputs, 25-pin Sub-D-F connector (4 in, 4 out)
HW20912:
4 AES3id outputs, 8 BNC-F connectors (4 in, 4 out)
HW20913: 8
AES3
outputs, 2 x 25-pin Sub-D-F connector (4 in, 4 out each)
HW20914:
8 AES3id outputs, 16 BNC-F connectors (8 in, 8 out)
Sampling rates:
referenced to digital inputs or internal clock
Basic Stereo PPM (Standard Software)
General
Input sources:
analog, digital, 3G-SDI, depending on mounted audio interface
2-ch. peakmeter:
for one installed Stereo channel pair L/R
Displays:
• Peak level
•
Peak
hold
• Numerical value of the display
Functions:
• Gain (+20 dB, +40 dB depending on selected standard)
• Peak hold on/off, Memory, Reset
Analog Peakmeter
Analog scales:
• DIN5: +5 .. -50 dB,
• Nordic: +12 .. -42 dB,
• BR IIa: 7 .. 1 (British),
• BR IIb: +12 .. -12 dB (British),
Integration time:
according to standard or 20 ms, 10 ms, 1 ms, 0.1 ms
Peak hold display:
1 s, 2 s, 4 s, 10 s, 20 s, 30 s, manual reset or off
Digital Peakmeter
Word width: 24 bit
Digital scales:
• TP60: +3 .. –60 dB
• Dig60: 0 .. –60 dB
• DIN5: +5 .. -50 dB,
• Nordic: +12 .. -42 dB,
• BR IIa: 7 .. 1 (British),
• BR IIb: +12 .. -12 dB (British),
Headroom/Headr. Ref:
adjustable in 1 dB steps in the range from 0 to –20 dB
Operation range:
adjustable in 1 dB steps in the range from 0 to –20 dB
Attack time:
as standard or selectable: Sample, 20 ms, 10 ms, 1 ms, 0.1 ms
British scales also 150 ms selectable
Gain:
+20 dB, +40 dB depending on selected standard
High-pass fi lter:
Off, 5 Hz, 10 Hz, 20 Hz
Peak hold display:
1 s, 2 s, 4 s, 10 s, 20 s, 30 s, manual reset or off
Over display hold time:
1 s or manual
PPM Over threshold:
Full Scale, Full Scale -1LSB, Full Scale -2LSB, –0.1 dBFS,
–0.5 dBFS, –1 dBFS, –2 dBFS, –3 dBFS
PPM Over attack time:
1 to 15 samples
PPM Over word width: 16 to 24 Bit, selectable
True Peak Over
threshold:
–1.0 dBTP, –2.0 dBTP, –3.0 dBTP, –4.0 dBTP