TC Electronic TouchMonitor - Manual (Page 25)

EN-25 Manual | TouchMonitor 7“/9“ Series common Getting Started | Working with Instruments and Presets
EN
Working with Instruments and Presets
In normal display mode the TouchMonitor shows the instruments and the screen layout defi ned in the currently loaded preset. You can use
the control bar keys to operate a selected instrument or to load a new preset.
If the control bar is not visible, just touch the screen. Then it will be displayed for some seconds to make your selection.
If you want to use the functions of an instrument, please proceed as follows:
1. Touch the screen area of the instrument you want to use. It will be
put into focus. The left section of the control bar now shows the
specifi c functions of the focused instrument.
The current selected instrument is marked with a colored
frame around. It represents the identifi er color like the colored
triangle.
2. Select the desired function.
If there are more than 6 functions, use the More key.
If a function key opens another level of functions, then use
the Close key to get back to the previous level.