TC Electronic G-System - Manual (Page 38)

Parallel Routing
In the Parallel routing, the same signal is fed to the input
of the Modulation, Pitch, Delay and Reverb sections, and
therefore these effects will not affect each other.
The Semi Parallel routing connects most Effect Blocks
serially, but the Reverb and Delay blocks are now
connected in parallel. Consequently, the Delay and
Reverb effects do not affect each other. This means that
e.g. the repeats of the Delay are not reverberated. The parallel connection of the Reverb and Delay may
help to “clear the effects picture” when using both Delay
and Reverb.
MENU MODE – PRESET ROUTING
36
Semi Parallel Routing