Cobalt Digital COMPASS 9121 3G_HD_SD-SDI_ASI Redundancy Switch - Manual (Page 22)

3
9121 Function Submenu List and Descriptions
3-2 9121 PRODUCT MANUAL 9121-OM (V1.2)
3. As shown below, expand the tree to access the cards within the frame.
Click on the card to be accessed (in this example,
“Slot 6: CDI-9121”).
.
When the card is accessed in DashBoard™ its function submenu screen
showing tabs for each function is displayed.
9121 Function Submenu List and Descriptions
Table 3-1 individually lists and describes each 9121 function submenu and its
related list selections, controls, and parameters. Where helpful, examples
showing usage of a function are also provided. Table 3-1 is primarily based
upon using DashBoard™ to access each function and its corresponding
submenus and parameters.
9121_DB_ACCESS2A.PNG
Table 3-1 9121 Function Submenu List
Input Select Control
Shows card selection to use card edge control or
DashBoard™ remote control.
• Card Remote Control / Card Edge Control
Select
• Enabled shows DashBoard remote control and status monitoring for
card functions has been enabled.
• Disabled shows DashBoard remote control has been locked out. In
this mode DashBoard only shows status, with control effected using
card edge switches.
Note: Card default settings enable remote control. Refer to 9121
Card Edge Control (p. 3-4) for using card edge control.